The handlebar clamps for the Quick-Release Aerobars need at least 22mm (7/8 inch) of straight, cylindrical handlebar on either side of the stem to clamp properly. 


Some aero-shaped handlebars have a sufficiently wide cylindrical section in the center of the handlebar to properly mount clip-on aerobars, however, some handlebars are ovalized or tapered within the clamping region. In this case, Redshift aerobars (or any clip-on aerobars) will not be compatible since they will not clamp securely on the non-round handlebar.


The best way for you to check is to measure yourself, take it to a bike shop to get measured, or look up your handlebars specs online.